Connecting External Components - JVC KD-X350BTS Manuel D'instructions

INSTALLATION/CONNECTION

Connecting external components

Connecting external amplifiers via output terminals
KD-X350BTS/
KD-X35MBS KD-X255BT
Output terminals
Output terminals 2-way crossover setting
REAR : Rear output
FRONT : Front output
SW : Subwoofer output
FRONT : Front output
REAR/SW : Rear/subwoofer output
40
ENGLISH
KD-X350BTS/KD-X35MBS:
MIC (Microphone input terminal) ( 15)
KD-X350BTS/KD-X35MBS:
Expansion port (12 V
(commercially available) ( 12)
KD-X255BT:
Microphone input jack ( 15)
Signal cord (not supplied)
3-way crossover setting
Tweeter output
Mid Range output
Woofer output
Mid Range output
Woofer output
500 mA) To the optional SiriusXM Vehicle Tuner
Remote wire (not supplied)
JVC Amplifier * 2
* 2
Firmly connect the ground wire of the amplifier to the car's chassis to avoid damaging
the unit.
To remote lead (blue/white) of
the wiring harness. ( 39)