Duct Mounting Kit - Crowcon IRmax Instructions D'installation, D'utilisation Et De Maintenance

The duct mounting kit is designed to be used with the IREX and IRmax for monitoring
potentially hazardous gases within ventilation ducts.
The air flow rate within the duct must be between 0.5 metres and 20 metres per second.
End cap
Calibration
gas tube
Bracket can
be mounted
internally or
externally to
the duct
Diagram 2
Detecting Gas Saving Lives
Gasket
Tube
IREX/IRmax
Air outlet
(must be facing
downwards to
allow water to
escape)

3. Duct mounting kit

Duct wall
Airflow
Inlet hole
should be in
the centre line
of duct facing
the direction of
flow
Detector
Flange
3