Sunshade For Irmax Or Irex; Kit Contents; Specifications - Crowcon IRmax Instructions D'installation, D'utilisation Et De Maintenance

2. Sunshade for IRmax or IREX

The Sunshade should be installed to protect the detector from getting too hot due to
exposure to strong direct sunlight and/or extend the footprint of the detector for lighter
than air gases.

2.1 Kit contents

Sunshade, bracket and four screws.
Detector
Diagram 1
Use the screws supplied to fix the bracket to the body of the detector. Attach the sunshade
to the bracket using remaining screws. The sunshade may be fitted to IRmax supplied with
or without an IR Display module.

2.2 Specifications

Material: Stainless steel 304-2B
2
Collector cone
Mounting bracket
IR Display
(optional)
Detecting Gas Saving Lives