Insignia NS-A3111 Guide De L'utilisateur page 14

• Audio - Displays the audio track currently
selected.
• Subtitle language - Displays the
language (subtitle) number currently
selected.
• Angle - Displays the viewing angle
currently selected. When a disc without
multiple angles is played back, "OFF" is
displayed.
• TRK (track info) - Displays the track
number being played and the total
number of tracks recorded on the disc.
• Repeat Mode - Displays any repeat mode
that is set.
Note
After checking the settings, press INFO again to
turn off the display.
Using the GOTO function
This function lets you directly select any point of
the disc from which to start playback.
TT 7 /36
DVD
Current title
To select a specific title, chapter, or track:
1 Press GOTO. The GOTO menu opens.
2 Press or
track, then press the corresponding number
key (0 - 9).
3 Press OK to confirm. Your shelf system starts
playback from the position you have selected.
Note
Press ZOOM/CLEAR to reset the highlighted title,
chapter, or track.
To locating a specific time:
1 Press GOTO. The GOTO menu opens.
2 Press or
3 Directly key in the time to start playback
using the number keys (0 - 9).
• The first two digits are the hours.
• The next two digits are the minutes.
• The last two digits are the seconds.
4 After entering the time, press OK to confirm.
Your shelf system starts playback from the
time you select.
Notes
• Some discs may not let you use this function.
• Some scenes may not be located as precisely
as you specify.
• This method for accessing a specific location is
available only within the current title of the DVD
disc.
• Press ZOOM/CLEAR to reset the time when
the time is highlighted.
14
CH 1/41
00:03:12
Chapter
Time
to highlight a title, chapter, or
to highlight time.
www.insignia-products.com
Insignia NS-A3111 DVD Executive Shelf System
Using program playback
Program playback lets you enter the order in
which a disc will play chapters or tracks.
To play a DVD, CD, VCD, or SVCD disc using
program play:
1 With a disc in the shelf system, press
PLAYMODE. The Playmode menu opens.
2 With MODE highlighted, press
select PROG.
3 Press OK to confirm. The PROG menu
opens.
Note
During VCD and SVCD playback, the function is
only available when PBC is off.
DVD PROG menu
CD, VCD, or SVCD PROG menu
4 Enter the title (DVD) or track (CD) numbers in
the blanks provided (
5 Press or
the chapter numbers (DVDs only) in the
blanks provided (
6 Press , ,
field, then repeat the above steps for more
inputs.
7 Press or highlight PLAY on the screen,
then press OK to start the programmed
playback.
Notes
• Highlight CLEAR on the PROG menu, then
press OK to delete all inputs.
• During VCD/SVCD playback, the function is
only available when PBC is turned off.
PLAY MODE PLAY MODE
MODE MODE PROG PROG
REPEAT REPEAT OFF OFF
or
Chapter
Title
.
)
to highlight chapter and enter
.
)
, or to move to another
to