Keypad Lock - DeLonghi JC TR 07 Série Mode D'emploi

Then set up the desired number of days (ma-
ximum 45) by means of the "+" or "-" keys.
The desired setting is autoconfirmed.
Now the LCD shows the
number of days, which decreases as the days
pass.
To deactivate the function at any time, press
the and "-" keys together.

4.3.6 KEYPAD LOCK

It is possible to lock the keypad to prevent accidental modi-
fications.
To activate the function, press the "Mode"
and "+" keys together and hold them both
down until the icon
To unlock the keypad, press the same two keys together as
before.
The "Keypad Lock" icon will no longer appear on the LCD.
IMPORTANT: The "Keypad Lock" function does not inhibit
the "Standby" key. This is therefore always active, even when
the "Keypad Lock" function is enabled.
4.4 RESET
To reset the default settings, in stand-by, press
the + and - keys for 4 seconds.
ATT: all the programmes and modifications you
have made will be cancelled.
icon and the set
appears on the display.
21
4.5 CHANGING THE SET POINT
If the set temperature for normal operation does not corre-
spond to the temperature you perceive in the middle of the
room, you can change the compensating settings by ±5°C.
For example, if the temperature set on the thermostat is
24°C, but it stops heating the room when you measure just
22°C.
You can correct the setting you read by -5°C.
You can change the setting in stand-by by
pressing and holding the OK and - keys.
IMPORTANT: In case of power down due to a black-out, all
current settings are kept in memory with the exception of
date and time.
If the power black-out occurs in "Chrono" mode, when power
is restored, the appliance resumes functioning in "Energy
Saving" mode.
IMPORTANT: If the appliance remains without power while
the "Overdrive (2h)" function is enabled, the date and time
settings are lost. When power is restored, the appliance
exits the function and resumes functioning in the mode se-
lected previously.
IMPORTANT: In case of power down while the "Holiday"
function is enabled, when restored, the function remains
active and the countdown of days to the end of the holiday
resumes from the moment of its stop.
IMPORTANT: In case of power down while the "ASC" fun-
ction is enabled, when restored, the function remains active
but a few days will be required for it to become fully ope-
rational.
5. CLEANING
Before cleaning, make sure the appliance is turned
off, cold and disconnected from the household
mains.
To clean, just wipe with a soft damp cloth and
neutral detergent. Never use abrasive or corrosive
cleaning products or solvents.
To maintain efficiency, remove the dust from the
surface and inside of the appliance at least twice a
year using a vacuum cleaner.
GB