DeLonghi JC TR 07 Série Mode D'emploi page 22

4.2.2 COMFORT
The "Comfort" temperature set point is the temperature
desired by the user.
GB
Press the "Mode" selection key until the icon
appears on the LCD.
Select the desired temperature set point by
using the "+" or "-" keys.
The temperature can be choosen in the inter-
val between 7 °C and 32 °C.
4.2.3 NIGHT/ECO
In "Night/Eco" mode the temperature set point must
not be higher than "Comfort" temperature set point. If
the "Comfort" temperature is set below the "Night/Eco"
temperature, the latter will be automatically adjusted
accordingly.
Press the "Mode" selection key until the icon
Select the desired temperature set point by
using the "+" or "-" keys.
The use of this operating mode is recommended in night-
time hours and in case no people is in the room for more
than 2 hours.
4.2.4 ANTI-FREEZE
In "Anti-Freeze" mode the temperature set point is fixed at
7 °C. The appliance starts heating when room temperature
goes under 7 °C and with low energy consumption it pre-
vents the room temperature to reach the freezing point.
Press the "Mode" selection key until the icon
appears on the LCD.
This operating mode is recommended when no people is in
the room for more than 1 day.
4.2.5 CHRONO
In "Chrono" mode, you can select one of the three preset
chrono-thermostat programs or the custom program. The
latter lets you set various temperatures ("Comfort" and
"Night/Eco") over a 24 hour period for each day of the week.
appears on the LCD.
CHOICE OF PROGRAM
Press the "Mode" key until the icon
played. Then press the "Mode" and "-" keys to-
gether and hold them both down for at least 3
seconds.
The program code (P1, P2, P3 and P4) flashes.
Press the "+" or "-" keys to set the program. Press
the "Mode" key to confirm.
The icon of the ASC function (see Ch. 4.3.1) starts
flashing. Press the key to activate the function
or the "-" key to de-activate it.
PROGRAM P1
FROM MONDAY TO FRIDAY
SATURDAY AND SUNDAY
PROGRAM P2
FROM MONDAY TO SUNDAY
PROGRAM P3
FROM MONDAY TO FRIDAY
SATURDAY AND SUNDAY
PROGRAM P4 - CUSTOM
With the "P4" program, you can set different temperatures
("Comfort" and "Night/Eco") over a 24 hour period for each
day of the week.
18
is dis-
HOURS MODE
0 - 6 Night/Eco
6 - 9 Comfort
9 - 16 Night/Eco
16 - 23 Comfort
23 - 0 Night/Eco
0 - 7 Night/Eco
7 - 23 Comfort
23 - 0 Night/Eco
HOURS MODE
0 - 7 Night/Eco
7 - 23 Comfort
23 - 0 Night/Eco
HOURS MODE
0 - 6 Night/Eco
6 - 9 Comfort
9 - 13 Night/Eco
13 - 23 Comfort
23 - 0 Night/Eco
0 - 7 Night/Eco
7 - 23 Comfort
23 - 0 Night/Eco