Functions - DeLonghi JC TR 07 Série Mode D'emploi

SETTING THE CURRENT DAY AND TIME
Before going on with the P4 custom program setup, check
that the hour and day of the week have been correctly set up.
If you fail to enter the setup in this way, press
the "Mode" key until the
the display.
Then press the "Mode" key again and hold
it down until the number indicating the day
flashes.
Adjust the day of the week by using the "+"
or "-" keys (1=MON, 2=TUE,...7=SUN), then
confirm by pressing the "Mode" selection key.
Repeat the same procedure for the hours.
The minutes now start flashing. Use the "+" or
"-" keys to set the minutes then press the key
to confirm and exit or press the "Mode" key to
enter the P4 program setup.
SETTING THE P4 PROGRAM
To enter the P4 custom program setup, press the "MODE" key
when you finish setting the minutes (see SETTING THE CUR-
RENT DAY AND TIME).
The time bar will now flash and the clock will show the time
being programmed.
Start with the first day. Choose by means of the "+" or "-" keys,
for each hour, between the "Comfort" temperature (two li-
nes) and the "Night/Eco" temperature (single line).
T Night/Eco
Press the "Mode" key to confirm and repeat the same
procedure for each day of the week.
The weekly program is now set.
The icon of the ASC function (see Ch. 4.3.1) starts flashing.
Press the key to activate the function or the "-" key to
de-activate it.
icon appears on
T Comfort T Night/Eco
4.2.6 ENERGY SAVING
This fixes the temperature at 17 °C. "Energy Saving" mode
reduces energy consumption when the room is left unused
but a comfortable temperature needs to be maintained.
To activate "Energy Saving", press the "Mode"
key until the "E S" symbol is displayed in place
of the hour/temperature.

4.3 FUNCTIONS

The appliance has a number of special functions to customise
and optimise use.
4.3.1 ASC
This function measures the thermal inertia of the room to
reach the set temperature and switches the appliance on
in advance to ensure that the "Comfort" temperature is re-
ached by the set time.
The function can switch the appliance on up to 2 hours early.
This function can be activated and operates only in
"Chrono" mode. (See Ch. 4.2.5.)
A number of days of data acquisition are required
to optimise the accuracy of the ASC function.
4.3.2 OPEN WINDOW
The "Open Window" function automatically detects an open
window in the proximity of the towel warmer (for example
during housework) and it goes into "Anti-Freeze mode", in
order to prevent unnecessary heating and to save energy.
The function can also detect the closing of a window and
reset the previous operating condition.
When switching the appliance on, the function is already ac-
tive, ready to detect any open windows.
To activate or deactivate the function, press
the key and hold it down until the
appears or disappears from the display.
When an open window is detected, the "Open
Window" icon flashes.
Now pressing the
Window" action until detection of the next
open window.
The icon stops flashing.
19
icon
key cancels the "Open
GB