M-Audio M3-8 Guide D'utilisation page 6

13. Power Indicator: The power indicator illuminates
when the monitor is receiving power and the rear
panel Power Switch is in the "ON" position.
14. Low-frequency Driver: The low-freqeuncy driver
outputs the bottom range of the audio spectrum.
15. Mid-frequency Driver: The mid-freqeuncy driver
outputs the middle range of the audio spectrum.
16. High-frequency
driver outputs the top range of the audio
spectrum. The driver is a "coaxial" design, inset
into the center of the mid-range driver.
Tip: Power outlets in North America, Japan, and many
parts of South America usually supply between 100V
and 120V, whereas outlets in Europe and most of
Africa and Asia provide between 220V and 240V. If you
are not sure about your region, be sure to check your
power outlet's rating and set the Input Voltage selector
before connecting and switching on your M3-8
monitors.
Driver: The high-freqeuncy
6
16
15
13
14