Power Supply; Parent Unit; Baby Unit - babymoov Premium Care A014204 Notice D'utilisation

Baby unit

1. ON/OFF and pairing
button
2. «MAIN MENU»
3-4. Microphone sensitivity
down adjustment
button
5-6. Night Light
7. Microphone
8. Transmit icon
9. Temperature on-screen
display
Place the camera on a flat surface between 1 m and 2,50 m from the baby's
head. Point the camera lens and microphone towards the baby.
A. BABY UNIT
• Operation from
batteries (3 x AAA 1.5 V
not included)
N.B. The range is longer when the transmitter is running on a power outlet.
Before the first use, charge the Lithium-Polymer battery for at least 3 hours. It is recommended to turn off
the device during the first charge.
The baby and parent unit are already paired with factory preset code when they are shipped from factory. However, we
recommend to perform pairing again in case interference is experienced.

PARENT UNIT

1.
OFF
OFF Button
BABY UNIT
Repeat the same operations on the RECEIVER.
The «P» icon is flashing
8. Turn off both units and then turn back on. Congratulations! Your camera is now connected!
8
CONTROLS LAYOUT
10. Power On/Battery
low icon
11. Microphone always
ON icon
12. Sound volume
13. Night Light icon
14. Baby unit's number
15. «Menu exit» icon
16. Micro-USB port and
power socket
17. Speaker
SETTING UP THE APPLIANCE
• USB Cables

power supply

2.
Keep pressing the
volume up button
Choose the number of the transmitter and confirm with the
«Menu» button
BABY MONITOR PREMIUM CARE • Instruction manual
Parent unit
18. ON/OFF and pairing button
19. «MAIN MENU»
20.Volume up button
21. Volume down button
22. Microphone
23. Speaker
24. Visual level meter/Out-of-
range icon
25. Temperature on-screen
display
26. Power On/Battery Low/
POWER SUPPLY
B. PARENT UNIT
• Operation from lithium
battery pack
PAIRING
3.
Switch down the button
to ON
Charging icon
27.Transmit icon
28. Vibration icon
29. Speaker mute icon
30. Baby unit's number
31. « Play all lullabies» icon
32. Lullabies icon
33. Battery low icon
34. «Menu exit» icon
35. Reply to baby
36. Micro-USB port and power
socket
1 m
• Charging up with USB
cables
38
Plugs not included
4.
ON
The «P» icon is flashing
Confirm pairing by
pressing the «Menu»
button a second time»