Photo Adapter - Leica TELEVID 62 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32

PHOTO ADAPTER

Most earlier and current reflex cameras can be
connected to one of the LEICA TELEVID 62 models
using the photo adapter (order no. 42 301).
This combination provides a high-performance
1:12.9/800 m telephoto lens, which you can use
to photograph the object being viewed quickly
and easily.
To attach the PHOTO ADAPTER to the Televid,
first of all release and remove the eyepiece. Then
screw the PHOTO ADAPTER onto the thread on
the outside of the bayonet.
Notes:
Case, front and back cover are all included.
The PHOTO ADAPTER for the Televid 77 models
(order no. 42 300) can also be used on Televid 62
models, although this combination can lead to
vignetting (distortion) at the edges.
Warning:
To connect the PHOTO ADAPTER to the relevant
reflex camera, an adapter ring with a T2 thread is
required on the camera system.
For Leica R cameras, we recommend using only
the LEICA T2 adapter, as adapters from other
manufacturers can lead to poor results and even
damage for the following reasons:
• If the relevant radial cams for LEICAFLEX
models are not present, this can result in incor-
rect exposures.
• Incorrect fitting can also cause incorrect expo-
sures and – due to there being no locking – can
lead to the connection coming loose.
• If the aperture lever on the LEICAFLEX SL2 col-
lides with the peripheral cam of the T2 adapter,
damage to both the camera and the adapter is
possible.
T2 adapter for Leica R / LEICAFLEX / LEICAFLEX
SL / SL2 (order no. 42 305)
21

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Apo-televid 62

Table des Matières