Vertical Steam Ironing; Putting Down The Iron During Ironing - Philips GC7600 Série Mode D'emploi

4239_000_8623_4_DFU-Luxury_A5_v2.indd 9
4 Press and hold the steam trigger to start ironing. Keep the steam
trigger pressed continuously when you move the iron over the fabric.
Note: When you use the appliance for the first time or after replacement of
the ANTI-CALC cartridge, it may take 10 seconds for steam to come out of the
appliance.
Note: The pump is activated each time you press the steam trigger. It produces
subtle rattling sound, which is normal. When there is no water in the water
tank, the pump sound is louder. Fill up the water tank with water when the
water level drops below the minimum level.
Steam boost function
- Use the steam boost function to remove stubborn creases.
Press the steam trigger twice quickly.

Vertical steam ironing

Hot steam is emitted from the iron. Never attempt to remove creases
from a garment that someone is wearing. Do not apply steam near your
or someone else's hand.
You can use the steam iron in vertical position to remove wrinkles from
hanging fabrics.
1 Hold the iron in vertical position, press the steam trigger and touch
the garment lightly with the soleplate.

Putting down the iron during ironing

- During ironing, you can place the iron either on the iron platform
or horizontally on the ironing board. Thanks to the OptimalTemp
technology, the soleplate will not damage the ironing board cover.
ENGLISH
9
31/03/15 10:24