Vertical Steam Ironing; Putting Down The Iron During Ironing - Philips GC7600 Serie Mode D'emploi

ENGLISH
8
4239_000_8641_3_DFU Booklet_A5_v1.indd 8
Steam boost function
- Use the steam boost function to remove stubborn creases.
Press the steam trigger twice quickly.

Vertical steam ironing

You can use the steam iron in vertical position to remove wrinkles from
hanging fabrics.
1 Hold the iron in vertical position, press the steam trigger and touch
the garment lightly with the soleplate.
Hot steam is emitted from the iron. Never attempt to remove creases
from a garment that someone is wearing. Do not apply steam near your
or someone else's hand.

Putting down the iron during ironing

- During ironing, you can place the iron either on the iron platform
or horizontally on the ironing board. Thanks to the OptimalTemp
technology, the soleplate will not damage the ironing board cover.
Energy saving
ECO mode
By using the ECO mode (reduced amount of steam), you can save energy
without compromising on the ironing result.
1 To activate the ECO mode, press and hold the on/off button for
2 seconds. The power-on light turns green.
2 To go back to the 'OptimalTemp' setting, switch the appliance off and
on again.
For the shortest ironing time, we advise you to use the 'OptimalTemp'
setting.
Safety auto-off (specific types only)
The safety auto-off function automatically switches off the appliance if it has
not been used for 5 minutes, to save energy.
09/01/14 15:59