Getting Started - Vornado 5303DC Guide D'utilisation

† This product and its packaging material are not toys and should be
kept out of reach of children.
Information Regarding the EC Declaration of Conformity
This product conforms with all relevant and necessary EC
directives, including:
- Low Voltage Directive (LVD)
- Electromagnetic Compatibility Directive (EMC)
- Energy Related Product Directive (ErP)
- Restriction of Hazardous Substances Directive (RoHS)
- Registration, Evaluation, Authorisation, and Restriction of
Chemicals (REACH)
The complete Declaration of Conformity is registered and can be
obtained from the importer.
PACKAGE RECYCLING: The packaging protects the appliance from
transport damage. The packaging materials are selected from the point
of view of their environmental friendliness and disposal technology and
are therefor recyclable.
† Dispose of all packaging materials in an environmentally
responsible manner.
4 English
WEEE Recycling
† Waste Electrical and Electronic Equipment Disposal: This
marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible
harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return
and collection systems or contact the retailer where the product
was purchased. They can take this product for environmental safe
recycling.
Battery Recycling
† BATTERY DISPOSAL - Batteries must be disposed of separately
from the product and not included in domestic waste. Dispose of all
types of batteries through an approved disposal centre or at your
community waste facility. Observe the current applicable regulations.
In case of doubt, please contact your waste disposal centre.
† Every consumer is legally obliged to all batteries and accumulators,
regardless of whether they contain harmful substances* or not, to
submit to a collection point of the city or of the trade, so that they can
be disposed of in an environmentally sound disposal method.
*Identification Cd = cadmium; Hg = mercury; Pb = lead

GETTING STARTED

Installing Circulator Head (Model 6803DC Only)
No tools required!
1. Gently place the circulator head face down on the ground on a
soft cloth to avoid scratches or damages to the unit. Insert power
cord into the top of pole (A) and pull through the bottom (B). Align
the Lock Release Button (C) on circulator head with the hole (D)
located on the pole. Push the pole onto the circulator head until
the Lock Release Button snaps into place.
B
Lock Release
Button
A
Stand Assembly (Model 6803DC Only)
1. The upper pole and lower pole are pre-assembled, with the
fastening nut (E) secured on the underside of the base. Rotate
fastening nut counter- clockwise to remove.
2. The legs are designed to fit into the grooves (F) on the underside
of the base cap. Assemble all the legs onto the pole, then
replace fastening nut by rotating clockwise to secure all the legs
in place.
F
E
English
5