Changing The Basic Settings; Care And Cleaning; Cleaning Agents - Bosch HSB738356M Notice D'utilisation

Changing the basic settings

Your oven has various basic settings. These settings can be
customised to suit your requirements.
Basic setting Selection 1 Selection 2 Selection 3
c1 Clock display always*
c2 Signal duration approx.
upon completion of 10 seconds
a cooking time or
timer period
c3 Waiting time until a approx.
setting is applied 2 seconds
* Factory setting

Care and cleaning

With good care and cleaning, your oven will remain clean and
fully-functioning for a long time to come. Here we will explain
how to maintain and clean your oven correctly.
Notes
Slight differences in the colours on the front of the oven are
■
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
■
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
■
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
:
Risk of electric shock!
Penetrating moisture may cause an electric shock. Do not use
any high-pressure cleaners or steam cleaners.
:
Risk of burns!
The appliance becomes very hot. Never touch the interior
surfaces of the cooking compartment or the heating elements.
Always allow the appliance to cool down. Keep children at a
safe distance.

Cleaning agents

Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
Do not use
for the hob
undiluted washing-up liquid or dishwasher detergent
■
abrasive materials, scouring sponges
■
aggressive cleaners such as oven spray or stain remover
■
high-pressure cleaners or steam jet cleaners
■
Do not use
in the oven
harsh or abrasive cleaning agents
■
cleaning agents with a high alcohol content
■
hard scouring pads or cleaning sponges
■
high-pressure cleaners or steam cleaners.
■
14
only with -
the but-
0
ton
approx. approx.
2 minutes* 5 minutes
approx. approx.
5 seconds* 10 seconds
No other time-setting option should have been set.
Press and hold the 0 button for approx. 4 seconds.
1.
The current basic setting for the clock display is shown in the
display, e.g. c1 1 for selection 1.
Use the @ or A button to change the basic setting.
2.
Confirm by pressing the
3.
The next basic setting appears in the display. You can scroll
through all levels with the
with the @ or A button.
To finish, press and hold the
4.
All basic settings are applied.
You may change the basic settings at any time.
Wash new sponge cloths thoroughly before use.
Area Cleaning agents
Appliance exterior Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Do not use glass cleaners or
glass scrapers.
Stainless steel Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Remove traces of limescale,
grease, starch and albumin (e.g. egg
white) immediately. Corrosion can form
under such residues.
Special stainless steel cleaning prod-
ucts suitable for hot surfaces are availa-
ble from our after-sales service or from
specialist retailers. Apply a very thin layer
of the cleaning product with a soft cloth.
Aluminium and Glass cleaner:
plastic Clean with a soft cloth.
Gas hob and pan Hot soapy water.
supports Use very little water. Water must not be
allowed to enter the appliance through
the base of the burners.
Clean boiled over liquids and spilt food
immediately.
You can remove the pan supports. Do
not clean the pan supports in the dish-
washer.
Gas burners, hot- Remove the burner cups and caps, clean
plate them with soapy water.
The gas outlet openings must remain
free from obstruction.
Ignition plugs: small, soft brush.
The gas burners only work properly
when the ignition plugs are clean. Dry all
parts thoroughly. Ensure they are refitted
correctly.
The burner caps are coated in black
enamel. The colour may change over
time. This does not affect their operation.
Do not clean the burner caps in the dish-
washer.
0 button.
button and change the setting
0
button for approx. 4 seconds.
0