Christopeit Sport RACER BIKE XL 2000 Notice De Montage Et D'utilisation page 13

Step 3:
Attach the handlebar (18) and computer (72).
1. Push the handlebar support (17) into the matching locator in
the main frame (16), set it at the desired position and lock it by
inserting the (19) in place and doing it up tight.
2. Turn out the screw (25) from handlebar support (17) and push the
handlebar (5) onto handlebar support (17) in desired horizontally
position. Tighten the position with L-quick release (22) and screw
in the screw (25) into handlebar support (17).
3. Place the computer (72) onto the computer holder from handlebar
(18) and tighten with screws (73). Push the plug of the sensor
cable (74) into the associated socket of the computer (72).
If necessary insert the button cell 3V-CR 2032 by watching for
the right polarity on the back of the computer (72).
4. Put the bottle holder (80) at handlebar (18) and fix it with two
screws (81).
Step 4:
Attach the pedals (1L+1R) at pedal crank (33+36).
1. Screw the right pedal (1R) into the locator in the right-hand side
(as seen in operation) for the pedal crank (36) (Note! the screw
direction is clockwise).
2. Screw the left pedal (1L) into the locator in the left-hand sid (as
seen in operation) for the pedal crank (33).
(Note! the screw direction is anti-clockwise).
13