Initialization; Selecting The Language; Setting The Clock - Panasonic WH-SDC0305J3E5 Mode D'emploi

Temperature of each zone
3
Time and day
4
5 Water Tank temperature
6 Outdoor temperature
7 Sensor type/Set temperature type icons
Water Temperature
→Compensation curve
Room Thermostat
→External

Initialization

Before starting to install the various menu settings, please initiate the Remote Controller by selecting the language of
operation and installing the date and time correctly.
When power is turned on for the first time, it becomes the setting screen automatically. It can also be set from personal
setting of the menu.

Selecting the language

Wait while the display is initializing.
When initializing screen ends, it turns to
normal screen.
When any button is pressed, language
setting screen appears.
1 Scroll with and
2 Press
to confirm the selection.

Setting the clock

1 Select with or how to display the time,
either 24h or am/pm format (for example, 15:00
or 3:00 pm).
2 Press
to confirm the selection.
3 Use and to select year, month, day, hour
and minutes. (Select and move with
press to confirm.)
4 Once the time is set, time and day will appear
on the display even if the Remote Controller is
turned OFF.
Water Temperature
→Direct
Room Thermostat
→Internal
to select the language.
and
Pool only
Room Thermistor
LCD blinking
EN
19