Power supply
Mains voltage: 380-415V 3N~, 50/60Hz
Component rated voltage: 220-240V
Mains cable available in the factory
•
The hob has been fi tted with a temperature-resistant
connection cable in the factory.
•
Connection to the mains is carried out in accordance
with the circuit diagram, unless the connection cable is
already fi tted with a plug.
•
If the mains cable of this appliance is damaged it will
need to be replaced with a special connection cable. In
order to avoid any risks, this must be carried out by the
manufacturer or his Customer Service.
Electrical connections
380-415 V 3N~
380-415 V 2N~
380-415 V 3N~
380-415 V 2N~
40
Instructions for assembly
2.13 Technical Data
Hob dimensions
height/ width/ depth ...mm
Cooking zones
all zones ............cm / kW
Hob ..............................kW
Fan ..............................kW
Plasma .......................kW
* Power when the power boost function is activated
2.14 Putting the appliance into operation
Once the hob has been installed and the power supply
has been provided (mains connected) an automatic test of
the controls will be carried out and information for Custo-
220-240 V 1N~
mer Service will be indicated.
Important: No items may be on the touch control sensor
keys when the appliance is being connected!
Briefl y wipe over the surface of the hob with a sponge and
soapy water and then dry with a clean cloth.
220-240 V 1N~
GB
200 x 900 x 580
19x22/ 2,2 (3,7)*
7.4
0.115
0.01