Connecting Conference Tables; Connecting Power Cables; Opening And Closing The Power Box - Steelcase FlipTop Twin Manuel D'utilisation

_______________________________________________________________
The casters have to be locked in place
whenever the power cables of the
conference table / training room table are
connected to another table.
5.5 Connecting conference
tables
Conference tables / Training room tables can be
connected with one another by mechanical means
so that they can be uniformly aligned. Connecting
elements for linking plates and tables are provided.
Figure 5-4: Connection variants: Connecting elements for linking
plates and tables

5.6 Connecting power cables

Danger due to voltage!
The metal parts of the desk can become
energised if live cables and connections are
damaged.
Do not earth electrical

devices on the desk frame!
ATTENTION
Risk of damage to power set!
 The power supply should not
exceed 16 amps or 3520 watts,
respectively.
156562
Operation and adjustment
Figure 5-4: Connecting power cables
 Remove all objects from the tabletop of the
conference table
Lock all casters in place

 The conference tables have to be connected
with one another by mechanical means.
Connect the power set connector with the

connector of the adjoining table
5.7 Opening and closing the
Power Box
Figure 5-5: Power Box unlock button
Opening the Power Box
 Slide the unlock button (see blue circle in figure
above) to open the Power Box and gain access
to the socket outlets; the hinged covers will
engage so that the Power Box remains open.
(The Power Box has to remain open when
plugs are connected).
Closing the Power Box
 Detach all connected plugs. Let go of one
hinged cover and push down the Power Box
back into the housing. Push down the hinged
panels to have them close.
11