Mains Connection; Pocket Transmitter; Headset - Renkforce BM-7200 Notice D'emploi

b) Mains connection
In case of failure, it must be possible to disconnect the mains adapter from the mains quickly and easily.
Do not let the mains adapter cable touch other cables.
Take care when handling mains cables and mains sockets. Mains voltage can cause fatal electric shocks.
• Turn off the receiver station (POWER on/off button to 0 position).
• Connect the round plug of the mains adapter connection cable to the DC INPUT mains socket (12) on the receiver
station.
• Connect the mains adapter to a proper wall socket.
c) Pocket transmitter
It is possible to connect an electric guitar or a clip-on microphone to the pocket transmitter (via jack
socket (26)) using a suitable jack cable. Observe all information in the user manuals of the guitar or clip-on
microphone regarding this matter.
• In order to use the pocket transmitter in combination with the provided headset, connect the jack plug of the headset
connection cable to the jack socket (26) of the pocket transmitter. Screw the plug into the socket in order to ensure
a secure connection.
• The pocket transmitter can be attached to a belt using the belt clip (22).
d) Headset
• Wear the headset on your head. Refer to the adjacent pictures
with illustrations of correct and incorrect wearing position.
• Adjust the volume of the headset directly with the VOL
control (27) on the pocket transmitter.
30