Intended Use; Delivery Content - Renkforce BM-7200 Notice D'emploi

3. Intended use

The wireless microphone set is intended for transforming acoustic signals (sound waves) into electric signals and for
transmitting these signals over a certain wireless distance.
The low-level audio output signal of the receiver station must only be connected to suitable audio inputs of audio
devices.
The receiver station has been approved for connection to 100 – 240 V/AC, 50/60 Hz alternating current only, using
the power adapter provided.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided
under all circumstances.
When using this product, observe all national regulations for radio operation applicable in your country.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product for purposes
other than those described above, the product may be damaged. In addition, improper use can cause hazards such
as short circuiting, fire, electric shock etc. Read the instructions carefully and keep them. Make this product available
to third parties only together with its operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.

4. Delivery content

• Receiving station with antennas
• Wireless microphone
• Headset microphone
• Pocket transmitter
• Power adapter
• 6.35 mm audio cable
• 2x mounting bracket
• 5x screws
• 4x 1.5 V batteries, type AA
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions from our website www.conrad.com/downloads or scan
the printed QR code. Follow the instructions on the website.
23