Use Of The Appliance - Signature SCT1001A+X Instructions D'utilisation

8
9
figure 1
Figure 1: Represents position of components prior to door reversal
Figure 2: Represents position of components after door reversal

USE OF THE APPLIANCE

NOTE: Before plugging in your freezer for the first time remove all
packing, clean the freezer with the lukewarm water and bicarbonate of
soda. Wipe dry with soft cloth.
Temperature Control
The temperature in the freezer is controlled by the thermostat control
regulator in the upper the freezer. Turn the thermostat control regulator
with key attached up or down to regulate the temperature inside the
freezer. The markings on control regulator indicated the "Min, Max" for
the different temperature grades. The temperature decreases with
position MIN being the warmest and position MAX being the coldest.
Set the control to the middle position for normal use, but you may set the
control to other positions of you find the middle is too cold or too warm.
2
1
4
3
7
6
5
-14-
2
1
4
3
8
7
6
5
9
figure 2