brennenstuhl professional LINE HL 5-00 Mode D'emploi page 7

OVERVIEW OF THE OPERATING ELEMENTS
1
Front LEDs
2
Spot LED
3
On/Off switch
4
Battery indicator (red/green)
5
Charging contact
6
230V charger
COMMISSIONING
Drain the battery completely and recharge before using the lamp for
the first time.
• On/off switch
• The flashlight cannot be used while recharging.
• Status LED
green when the battery is fully charged.
• If the lamp is not used for an extended period of time, charge the
battery every 3 months.
CHARGING
• Charging with 230V charger:
Place the hand-held lamp in the charger station
230V power supply unit
station
lamp is fully charged when the charger indicator LED on the lamp
turns greed.
• Charging via USB (e.g. laptop): Connect the USB port on the laptop
to the charging port on the charger station
14915 BA_proLINE Multifunktionsleuchte.indd 7
3
switching levels: spot / 50% / 100% / off
4
: Battery status: red during charging,
6
9
using the USB cable
www.professionalline.com
7
USB charger cable
8
Charging station
9
Charger outlet
10
Hook
11
Magnetic foot
12
Magnets (rear side)
to the charging port on the charger
7
and plug it in. The hand-held
9
8
- connect the
7
using USB cable
4
.
7
25.07.17 16:24