HQ -INV4000-12 Mode D'emploi page 2

12 V DC to 230 V AC Soft Start Power Inverter
24 V DC to 230 V AC Soft Start Power Inverter
4000 WATT CONTINUOUS OUTPUT POWER
SPECIFICATION
Specs.
Output power
Input voltage
Output voltage
Output waveform
Output frequency
Standby current
Efficiency
High voltage input shutdown
Battery low alarm
Battery low shutdown
Thermal protection
Cooling
Protection
Fuse
AC outlet
Size ( LxWxH )
Weight
INSTALLATION
Mount the inverter horizontally or vertically on a flat surface.
CAUTION!
Ensure these instructions are followed when installing the inverter:
1. Make sure the inverter stays dry.
2. The inverter should be installed in a cool place, ambient temperature between 0°C and 25°C.
3. To avoid fire hazard and overheating, do not cover or obstruct the ventilation openings of the
inverter. Regularly check the ventilation openings as they collect dust and dirt. Also keep at
least 2.5 cm space around the inverter for air flow.
4. To avoid risk of fire and explosion, please do not install the inverter close or next to flammable
substances or batteries.
5. Install the inverter out of reach of children.
ENGLISH
DC 12 V
4000 W continue
8000 W surge output
DC 10 ~ 16 V
AC 230 V
Modified sine wave
50 or 60 Hz
< 1 A
85% ~ 90%
DC 16 V +/- 0.5 V
DC 10.5 V +/- 0.5 V
DC 10 +/- 0.5 V
60 +/- 5°C
Temperature controlled fan
* Output short
* Input polarity reverse (by fuse)
* High DC input voltage
* Battery low alarm
* Battery low shutdown
* Overload
* Over temperature
30 A * 18 pcs
Two
580x210x159 mm
11.2 kg
2
DC 24 V
4000 W continue
8000 W surge output
DC 20 ~ 30 V
AC 230 V
Modified sine wave
50 or 60 Hz
< 0.8 A
85% ~ 90%
DC 31 V +/- 0.8 V
DC 21 +/- 0.8 V
DC 20 +/- 0.8 V
60 +/- 5°C
Temperature controlled fan
15 A * 18 pcs
Two
580x210x159 mm
11.2 kg