Medion MD 15526 Mode D'emploi page 82

6.4.3. Mode 3 (fast charging for 12 V batteries, from 1.2 Ah to
120 Ah)
Set this mode to charge batteries with a capacity over 1.2 Ah and normal ambient
temperatures.
The charger will normally recognise the modes suitable for the battery type. If the
battery is not recognised, proceed as follows:
NOTE
You can identify the battery type from the type plate on your battery.
 Press the MODE button several times to select Mode 3.
Charging mode 3
If you do not then set another mode, the electronics automatically start the charg-
ing process with a charging current of around 4 A.
Once the battery is fully charged, the frame around the battery icon stops flashing
and the entire battery icon lights up permanently. Trickle charging takes place in
this status.
6.4.4. Mode 4 (fast charging for 12 V batteries, from 1.2 Ah to
120 Ah, in cold temperatures)
Set this mode to charge batteries with a capacity over 1.2 Ah and lower ambient
temperatures. Set this mode also to charge AGM batteries (absorbent glass mat:
batteries in which the electrolyte is held in glass fibre mats) with a capacity of more
than 1.2 Ah.
The charger will normally recognise the modes suitable for the battery type. If the
battery is not recognised, proceed as follows:
NOTE
You can identify the battery type from the type plate on your battery.
 Press the MODE button several times to select Mode 4.
Charging mode 4
If you do not then set another mode, the electronics automatically start the charg-
ing process with a charging current of around 4 A.
Once the battery is fully charged, the frame around the battery icon stops flashing
and the entire battery icon lights up permanently. Trickle charging takes place in
this status.
will be shown in the display.
will be shown.
DE
FR
NL
EN
81