Connecting The Charger To The Battery; Select Charging Mode - Medion MD 15526 Mode D'emploi

6.3. Connecting the charger to the battery

ATTENTION!
Risk of electric shock!
There is a risk of electric shock from live parts.
 Before assembly and maintenance work and before
cleaning the device, always unplug it from the mains
power supply!
 Always unplug the device before removing or at-
taching the connection clamps to the terminals on
the battery.
NOTE
Before disconnecting a car or motor bike battery, first consult the vehi-
cle's instruction manual on the potential consequences of disconnecting
the battery.
 If the battery that you wish to charge is connected in the
vehicle, first disconnect the vehicle's negative terminal
connection cable (black) from the battery's negative ter-
minal before the charging or trickle charging process. The
battery's negative terminal is usually connected to the
vehicle's bodywork.
 Then disconnect the vehicle's positive terminal connec-
tion cable (red) from the battery's positive terminal.
 Then attach the charger's positive terminal clamp (red) to
the battery's positive terminal and then the negative terminal clamp (black) to
the battery's negative terminal.
 Connect the battery charger's mains cable to a mains socket.

6.4. Select charging mode

Select a charging mode depending on the battery type and ambient temperature.
You can also recharge a completely discharged battery ("regeneration").
The charger's electronics do not start the charging process directly after connect-
ing the battery but only after a charging mode has been selected. This avoids sparks
that often occur during the connection process.
 To select a charging mode, press the MODE button several times. The symbol of
the respective mode will be shown on the display.
DE
FR
NL
EN
79