Using The Appliance - Clatronic Energy BS 1231 Mode D'emploi

5....-05-BS 1231
Overview of the Components
1 Cable
2 On/off switch
3 Vacuum power regulator
4 Carrying handle
5 Cable-winding key
6 Accessory compartment
7 Accessory compartment opener
8 Dust bag filling display
9 Dust bag compartment
10 Button for opening the dust bag
compartment
11 Hose connection
1. Insert the connection head of the suction hose (12) into the hose connection
(11) until its locks in place.
2. In order to release the hose again, press the two buttons on the side of the suc-
tion hose at the same time.
3. Keep the buttons pressed and then pull the hose out.
1. Attach the floor nozzle (16) or the accessory.
2. Unwind the length of cable (1) you require.
3. Insert the mains plug into a correctly installed safety socket (230 V, 50 Hz) and
then switch the machine on using the on/off switch (2).
4. Set the vacuum power with the vacuum power regulator (3).
5. Vacuum at a steady speed. There is no need to exert pressure.
6. Attention: pay attention to the range that can be covered with the cable length.
Accessory Compartment (6):
The integrated accessories (crevice nozzle, upholstery/brush combination nozzle)
can be found by pulling the lid (7) of the accessory compartment.
Nozzle accessories:
Crevice nozzle:
Upholstery/brush combination nozzle: For cleaning upholstery, curtains etc.
Floor nozzle:
04.03.2003 11:21 Uhr
Start-up
12 Vacuum hose
13 Telescopic suction tube
14 Telescopic suction tube button
15 Hook on the suction tube
16 Floor nozzle
17 Parking assistance
Accessories:
Crevice nozzle
Upholstery/brush combination nozzle

Using the Appliance

For vacuuming in corners and crevices.
For cleaning carpets or smooth surfaces.
Seite 35
GB
35