Basic Adjustment Settings; Setting Up Tv Channels Automatically; Using Auto Installation; Setting Up Analogue Tv Channels Manually - Pioneer PDP507XA Mode D'emploi

Basic Adjustment Settings

Basic Adjustment Settings

Setting up TV channels automatically

This section describes how to automatically search for and set
up TV channels.

Using Auto Installation

When the Plasma Television is switched on for the first time
after purchase, the initial auto installation is initiated. You can
automatically set language, country and channels in
successive operations.
1
Select "Language" ( / ).
2
Select a language ( / ).
Auto Installation
Language
Country
Installation
• You can select from among 16 languages; English,
German, French, Italian, Spanish, Dutch, Swedish,
Portuguese, Greek, Finnish, Russian, Turkish,
Norwegian, Danish, Czech, and Polish.
3
Select "Country" ( / ).
4
Select the country ( / ).
5
then ENTER).
Select "Start" ( /
• Auto Installation automatically starts.
• To quit Auto Installation in progress, press RETURN.
• You can start Auto Installation from the Home menu after
moving to another country, for example. Perform the
following steps 1 to 3 before starting Auto Installation.
➀ Press HOME MENU.
➁ Select "Setup" ( /
➂ Select "Auto Installation" ( /
• If no channel is found, check the antenna connections, and
then retry Auto Installation.
Setting up analogue TV channels
manually
English
This section describes how to set up analogue TV channels
Austria manually.

Using Manual Adjust

Use Manual Adjust to set up analogue TV channels manually.
1
2
Start
3
4
5
6
7
8
NOTE
then ENTER).
• The password entry screen appears. Enter your 4-digit
password using buttons 0 to 9.
Press HOME MENU.
then ENTER).
Select "Setup" ( /
Select "Analogue TV Setup" ( /
• The password entry screen appears. Enter your 4-digit
password using buttons 0 to 9. For the password, see
"Using a password" on page 41.
Select "Manual Adjust" ( /
Select "Programme Entry" ( / ).
Manual Adjust
Programme Entry
Search
System
Colour System
Store
Tuner NR
Child Lock
Decoder
Select a programme number ( / ).
• You can select 1 through 99.
Select "Search" ( / ).
Enter a frequency using buttons 0 to 9 and ENTER.
• You can also press / to enter a frequency.
Manual Adjust
Programme Entry
Search
System
then ENTER).
then ENTER).
then ENTER).
1
42.75MHz
B/G
Auto
No
On
View
Off
1
42.75MHz
B/G
08
27
En