Led Indicator - Krüger & Matz DISCOVERY LITE KM0523L Mode D'emploi

Owner's manual
3. Start playing music from your device.
Notes:
• Track selection is controlled by the external device when in AUX mode.
• Bluetooth mode has priority. If you enter AUX mode, while Bluetooth connection is
established, the priority connection will remain and override AUX connection while
playing music. When music playback is paused, the speaker will automatically switch
to AUX mode. When you disconnect the cable from the AUX input, the speaker will
quit AUX mode and switch to Bluetooth mode. Remember to terminate Bluetooth
connection if you want to use AUX mode.
CHARGING
1. Use the included USB cable and insert one plug to the speaker's microUSB port; connect
the other plug to the compatible PC USB port or AC charger.
2. When the speaker is charging, red LED indicator is on.
3. When the speaker is fully charged, LED indicator goes off.
Notes:
• Please be sure the battery has been charged fully before first use.
• Charging continues even if the speaker is turned off.
• The speaker will issue sounds to inform that the battery level is low.

LED INDICATOR

Indicator activity
Solid blue
Blue flashing quickly
Blue flashing slowly
Solid green
Solid red
RESETTING THE SPEAKER
When the device does not operate properly, press and hold the Power button for about
10 seconds to reset the speaker. Afterwards, press the Power button again to turn on the
speaker.
System state
Speaker is on
Bluetooth pairing mode
Bluetooth connection established
AUX mode
Charging
9