Storing Fm Stations Automatically - Sony STR-DA50ES Mode D'emploi

PRESET TUNING +/–
DISPLAY
MEMORY
TUNING/PTY SELECT +/–
DISPLAY
BASS BOOST
VIDEO 1 VIDEO 2 VIDEO 3 DVD TV/LD
MEMORY FM MODE TUNING/ RDS INPUT EQUALIZER
– PTY SELECT + PTY EON MODE
SPEAKERS
A
OFF B
PRESET TUNING
A + B – +
VIDEO 3
INPUT
MULTI CHANNEL DECODING
SHIFT FM/AM
PHONES
S-VIDEO VIDEO L AUDIO R
SHIFT
FM/AM
FM MODE
PTY
EON
Brief descriptions of buttons and controls
used to receive broadcasts
PRESET TUNING +/– buttons: Press to scan all preset
radio stations.
DISPLAY button: Press to display the RDS information.
TUNING/PTY SELECT +/– buttons: Press to scan all
available radio stations or select program types.
FUNCTION control: Rotate to select the tuner.
EON button: Press to set the receiver to switch stations
automatically.
PTY button: Press to scan preset stations by the program
type.
FM MODE button: If "STEREO" flashes in the display
and the FM stereo reception is poor, press this button to
improve the sound. You will not be able to enjoy stereo
effect but the sound will be less distorted.
Note
If "STEREO" does not appear at all even when the FM broadcast
is received normally, press this button to turn on the "STEREO"
indication.
FM/AM button: Press to select the FM or AM band.
MEMORY button: Uses for memorizing preset stations.
SHIFT button: Press to select a memory page (A, B, or C)
for presetting radio stations or tuning to preset stations.
38 GB
MASTER
VOLUME
SUR
SOUND FIELD
EQ
ON/OFF
INDEX
TAPE MD/DAT CD TUNER PHONO
BALANCE
SOUND FIELD CURSOR SET UP
GENRE MODE MODE
V
B b
v MODE FUNCTION MUTING
L R
5.1
INPUT
FUNCTION
Storing FM Stations
Automatically
This function lets you store up to 30 FM and FM RDS
stations in alphabetical order without redundancy.
Additionally, it only stores the stations with the clearest
signals.
If you want to store FM or AM stations one by one, see
"Presetting radio stations" on page 40.
For details on the buttons used in this section, see "Brief
descriptions of buttons and controls used to receive
broadcasts" on this page.
1
Press 1/u to turn off the receiver.
2
Hold down MEMORY and press 1/u to turn the
receiver back on.
"Autobetical select" appears in the display and the
receiver scans and stores all the FM and FM RDS
stations in the broadcast area.
For RDS stations, the tuner first checks for stations
broadcasting the same program, then stores only the
one with the clearest signal. The selected RDS stations
are sorted alphabetically by their Program Service
name, then assigned a two character preset code. For
more details on RDS see page 41.
Regular FM stations are assigned two character preset
codes and stored after the RDS station.
When done, "Autobetical finish" appears in the
display momentarily and the receiver returns to
normal operation.
Notes
• Do not press any of the buttons on the receiver or supplied
remote during autobetical operation.
• If you move to another area, repeat this procedure to store
stations in your new area.
• For details on tuning the stored stations, see page 40.
• The FM MODE setting is also stored along with the station.
• If you move the antenna after storing stations with this
procedure, the stored settings may no longer be valid. If this
happens, repeat this procedure to store the stations again.
(AUTOBETICAL)