Storing Stations Automatically - Sony XAV-7W Mode D'emploi

FM/MW/LW Reception
MODE
MENU
SOURCE
Notes
• When there are not enough broadcast
stations or when the signal is weak,
automatic storing may not be
performed.
• When a preset station number is shown
on the monitor, stations will be stored
in subsequent numbers.
18
Storing stations automatically — Best
Tuning Memory (BTM)
1-6
You can have the unit automatically select stations with the
strongest signals in the selected band and store these in the
order of their frequency. 6 stations each can be stored in the
FM1, FM2, FM3, MW, and LW bands, resulting in a total of
18 FM stations, 6 MW stations, and 6 LW stations.
B/b
V/v Follow the steps below with the card remote commander
while the monitor is open.
1
Press SOURCE to switch to radio reception.
ENTER
2
Press MODE to select the frequency band in
which you want to store stations.
With each press of the button, the unit cycles through the
bands in the following order:
FM1 t FM2 t FM3 t MW t LW
3
Press MENU.
4
Press V or v to select "BTM" (Best Tuning
Memory).
5
Press ENTER.
"BTM" flashes, and strong stations in the selected band are
memorized in the order of their frequency.
When the storing process is completed, the regular display
appears again.
B T M