Publicité
Les langues disponibles
Les langues disponibles
EMPTYING THE DUST CUP
IMPORTANT: Unplug the power cord before performing any maintenance.
To remove Dust Cup, press button to the right of
the dust cup handle.
To remove debris from the top portion of
the dust cup, press top release button and lift
handle to open.
sharkc le a n.com
To empty debris into trash, press lower release
button and bottom of dust cup will drop open.
To reinstall, place bottom of dust cup into
pod and then tilt back until it clicks into place.
CLEANING AND REPLACING THE FILTERS
CLEANING FILTERS
Regularly clean and replace your filters to keep your vacuum's suction power optimal.
To clean filters, rinse with cold water only to prevent damage from cleaning chemicals. Allow all
filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn
into electric parts.
IMPORTANT: DO NOT use soap when cleaning the filters.
Foam
Filter Frame
Felt
CLEAN PRE-MOTOR FILTERS
EVERY 3 MONTHS
Remove Dust Cup, then lift out Filters.
REPLACING FILTERS
Follow the previous instructions for removing the filters. The pre-motor filters should be replaced
every 2.5 years. The post-motor HEPA filter should be replaced every 3 years.
Replacement Pre-Motor
Foam & Felt Filter Kit
XFF650
To order replacement parts and filters, visit sharkaccessories.com.
Filter Access
Filter
HEPA
Door
CLEAN HEPA FILTER
EVERY YEAR
Press button at bottom of Filter Door. Tilt
Filter Door and lift out. Remove HEPA Filter.
To reinstall, insert HEPA filter into unit and
replace the filter door.
Replacement HEPA Filter
XHF350
s ha rkc l ea n.co m
Publicité
