Publicité
Les langues disponibles
Les langues disponibles
WHOLE-HOME CLEANING
POWER SWITCH
Press power button to turn on vacuum.
Please note the brushrolls will not spin
unless the wand is reclined.
BRUSHROLL INDICATOR LIGHT
INDICATOR LIGHT
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
Solid Green: The brushrolls are spinning and working as they should.
Solid Red: There is a jam in the brushroll area. Turn your vacuum off and remove any blockages
in the nozzle.
Flashing Red: The motorized floor nozzle is overheating. Turn off your vacuum and wait
1 hour for it to cool down*.
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please set to Carpet/Low Pile. NOTE: For particularly
stubborn stuck-on dust messes, set to Carpet/Low Pile mode.
*See Troubleshooting section for further instructions.
sharkc le a n.com
SETTINGS
SURFACE SELECTOR
Thick Carpet & Area Rug Cleaning
Set surface selector to Thick Carpet/Area Rug.
Carpet & Low Pile Cleaning
Set surface selector to Carpet/Low Pile to increase the
speed of your brushrolls and to help remove stuck-on dust
and debris.
Hard Floor Cleaning
Set surface selector to Hard Floor.
WHOLE-HOME CLEANING
CLEANING MODES
UPRIGHT
To engage brushroll, place foot on floor nozzle
and tilt handle back.
ABOVE-FLOOR—HANDLE
Press the Handle Release latch to detach the
handle from the wand.
LIFT-AWAY®
Press the Lift-Away button to detach the pod
from the floor nozzle.
NOTE: All accessories attach to either the wand or the handle.
ABOVE-FLOOR—WAND
Press the Wand Release button to detach the
wand from the pod.
LIFT-AWAY®
With pod removed, press the Wand Release
button to detach the wand from the floor
nozzle.
s ha rkc l ea n.co m
Publicité
