Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TECHNICAL DATA
Parameter description
Parameter value
Product name
Offroad Farm Car Jack
Model
MSW-OWH-3000
Dimensions [mm]
1090x100x1235
Maximum load [t]
2,5
Lever length [mm]
910
Lifting range [mm]
130-1045
Diameter of
-
the lifting washer [mm]
Height adjustment [mm]
-
Air pressure (MPa)
-
Weight [kg]
12,50
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines,
using
state-of-the-art
technologies
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
a trouble-free operation, use it in accordance with this user
manual and regularly perform the maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
Legend
The product satisfies the relevant safety
standards.
Read instructions before use.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Wear protective goggles.
Wear protective gloves.
Wear foot protection.
ATTENTION! Danger of hand crushing.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details it may
differ from the actual machine.
The original operation manual is in German. Other
language versions are translations from German.
6
U S E R M A N U A L
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in serious injury or even
death.
Whenever "device" or "product" are used in the warnings
and instructions, it shall mean Offroad Farm Car Jack.
2.1. SAFETY AT THE WORKPLACE
a)
Make sure the workplace is orderly and well lit.
A messy or poorly lit workplace may lead to accidents.
Try to anticipate what may happen, observe what is
going on and use common sense when working with
the device.
b)
Upon discovering damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
c)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
d)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
e)
If a fire starts, use solely powder or carbon dioxide
(CO
) fire extinguishers suitable for use on live
2
devices to put it out.
and
REMEMBER! When using the device, protect children
and other bystanders.
2.2. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The machine may be operated by physically fit persons
who are able to handle the machine and properly
trained and who reviewed this operating manual and
received training in occupational health and safety.
c)
The machine is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience and/
or knowledge unless they are supervised by a person
responsible for their safety or they have received
instructions on how to operate the machine.
d)
When working with the device, use common sense
and stay alert. Temporary loss of concentration whilst
using the device may lead to serious injuries.
e)
Use personal protection equipment as required
for working with the device, specified in section 1
(Legend). The use of correct, approved personal
protection equipment reduces the risk of suffering an
injury.
f)
Do not overestimate your abilities. When using the
device keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
g)
Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
h)
Compressed air may cause serious injury.
i)
It is recommended to use eye, ear and respiratory
protection.
Rev. 27.09.2018
2.3. SAFE DEVICE USE
a)
Do not overload the device. Use appropriate tools
for the given task. A correctly selected device will
perform the task for which it was designed better
and in a safer manner.
b)
It is necessary to disconnect the pressure line
before commencing any adjustment, accessories
replacement or after finishing work with the device.
Such a preventive measure reduces the risk of an
accident.
c)
When not in use, store in a safe place, away from
children and people not familiar with the device, who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
d)
Maintain the device in a good technical state. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of
the device. If damage is discovered, hand over the
device for repair before use.
e)
Keep the device out of the reach of children.
f)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
g)
To ensure the operational integrity of the device, do
not remove factory fitted guards and do not loosen
any screws.
h)
When transporting and handling the device between
the warehouse and the destination, take into account
the occupational health and safety principles for
manual transport operations which apply in the
country where the device will be used.
i)
It is forbidden to move, adjusting and rotating the
device in the course of work.
j)
Do not leave this appliance unattended while it is in
use.
k)
Use air to supply the device, it is forbidden to use
other gases.
l)
Clean the device regularly to avoid a durable
encrustation of dirt.
m)
Do not use the device in the area exposed to strong
magnetic field and adverse weather conditions (sub-
zero temperatures, atmospheric discharges).
n)
Do not use the device to handle a dangerous load
(eg. molten metal, acid, radiant material, extremely
brittle loads).
o)
Do not use the device to lift people.
p)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
q)
Lift / lower the elements with parameters consistent
with the data given in the technical data table. Do
not exceed the permissible operating parameters.
r)
Make sure that the device is placed on a flat and
stable surface.
s)
Make sure that the device does not slip under
influence of weight.
t)
Ensure that the jack saddle is fully placed under the
lifted element.
u)
Make sure that the lifting element is stably set so
that it will not slip in the course of lifting / lowering.
v)
Set the load centrally on the jack saddle before
lifting.
w)
Do not work at the load unsecured by supports.
x)
The device is used for lifting, it is not intended to
support the load in the course of works on the
vehicle.
Rev. 27.09.2018
y)
In the course of using the jack it is necessary to
secure the lifted vehicle against fall by means of
supports.
z)
Secure the load with supports immediately after the
end of lifting,
aa)
Lowering / lifting operations must be performed
in a slow, uniform motion. It is forbidden to make
sudden movements.
bb)
The pressure force should be even and directed
vertically downwards.
cc)
Do not use any handle extension.
dd)
Do not carry the device behind the lever.
ee)
In the course of using the jack it is necessary to
attentively observe the load lifting / lowering
process.
ff)
The device is not used to lift the entire vehicle, but
only its parts (e.g. one wheel or one axle).
gg)
Failure to follow the warnings may result in loss of
control over the device and the load, which may lead
to a property damage, personal injury or sudden
death.
ATTENTION! Despite the safe design of the device
and its protection facilities and despite the use of
additional elements protecting the operator, there is
still a slight risk of an accident or injury when using
the device. When using the device stay alert and use
common sense.
3. USE GUIDELINES
The device is intended for short-term lifting of vehicles.
Long-term lifting by means of the device is prohibited, in
such a case it is necessary to place supports under the lifted
element.
The user is liable for any damage resulting from
nonintended use of the device.
3.1. DEVICE DESCRIPTION
MSW-OWH-3000
3
6
5
4
2
1
1.
Base
2.
Jack saddle
3.
Clamp
4.
Lock
5.
Steel guide
6.
Lever
7
Publicité
Table des Matières
