Measuring With 3 Points Mode - Nikon Forestry Pro II Manuel D'utilisation

„ Measuring with 3 points mode
„
En
Before starting the measurement, set the measurement display
Fr
mode to "3 points mode". See page 21 for more information.
Perform measurement three times in the order of 1, 2, and
3 in the illustration on the right. Points 2 and 3 can be
reversed.
1. Press the PWR button to turn on the power.
• When the laser rangefinder is on standby,
2. Aim at the first point of the target (1), and then press the PWR
button to measure.
• The measurement result (horizontal distance to the first
point) is displayed as shown on the right.
• stops flashing and
3. Aim at the 2nd point of the target (2), and then press the PWR
button to measure.
• The measurement result (Ang (1) and Hgt (1)) is displayed as
shown on the right.
• stops flashing and
4. Aim at the 3rd point of the target (3), and then press the PWR
button to measure.
• stops flashing and the measurement result (Ang (2)
and Hgt (2)) is displayed. See page 20 for more
information on the display content.
24
flashes in the internal display.
starts flashing.
starts flashing.
Ang (1)
Ang (2)
Internal display External display
Hgt (1)
Hgt (2)