TECHNICAL DATA
Parameter description
Parameter value
Product name
AdBlue Pump
Model
MSW-AOP40
MSW-AOP40S
Rated voltage [V~] /
230 / 50
Frequency [Hz]
Rated power [W]
550
Rotational speed [rpm]
2,800
Flow [l/min]
40
35-45
Maximum pumping
10
height [m]
Maximum suction
5
3
height [m]
Operating pressure
2.8
5
[bar]
Diameter of input /
1"
output connection
Temperature of
<60
pumped liquid [°C]
Flow meter
-
Yes (Accuracy
±1%)
Protection rating IP
IP55
Dimensions [mm]
283×184×165
371×350×209
Weight [kg]
5.9
11.9
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed and
manufactured in accordance with strict technical guidelines,
using state-of-the-art technologies and components.
Additionally, it is produced in compliance with the most
stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
LEGEND
The product satisfies the relevant safety standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER! Applicable
to the given situation (general warning sign).
8
U S E R M A N U A L
Wear protective goggles.
Wear protective gloves.
Wear foot protection.
Wear protective clothing.
ATTENTION! Electric shock warning!
ATTENTION! Fire hazard - flammable materials!
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is written in German. Other
language versions are translations from the German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury or even death.
The terms "device" or "product" are used in the warnings
and instructions to refer to "Adblue Pump".
Do not use in very humid environments or in the direct
vicinity of water tanks. Prevent the device from getting
wet. Risk of electric shock! Do not put your hands or other
items inside the device while it is in use! Do not exceed the
maximum permissible operating pressure! Do not cover
the ventilation openings!
2.1. ELECTRICAL SAFETY
a)
The plug must fit the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b)
Avoid touching earthed elements such as pipes,
heaters, boilers and refrigerators. There is an
increased risk of electric shock if the earthed device
is exposed to rain, comes into direct contact with a
wet surface or is operating in a damp environment.
Water getting into the device increases the risk of
damage to the device and of electric shock.
c)
Do not touch the device with wet or damp hands.
d)
Use the cable only for its designated use. Never use it
to carry the device or to pull the plug out of a socket.
Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
e)
If working with the device outdoors, make sure to
use an extension cord suitable for outdoor use.
Using an extension cord suitable for outdoor use
reduces the risk of electric shock.
f)
If using the device in a damp environment cannot
be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of
electric shock.
g)
Make sure the electrical connections are not exposed
to flooding and moisture.
h)
Disconnect the device from the power source after
every use.
i)
Comply
with
the
applicable
electrical
safety
regulations.
2.2. SAFETY IN THE WORKPLACE
a)
Make sure the workplace is clean and well lit. A
messy or poorly lit workplace may lead to accidents.
01.03.2019
Try to think ahead, observe what is going on and use
common sense when working with the device.
b)
Do not use the device in a potentially explosive
environment, for example in the presence of
flammable liquids, gases or dust. The device
generates sparks which may ignite dust or fumes.
c)
If you discover damage or irregular operation,
immediately switch the device off and report it to a
supervisor without delay.
d)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
e)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
f)
In case of fire, use a powder or carbon dioxide
(CO
) fire extinguisher (one intended for use on live
2
electrical devices) to put it out.
g)
Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
h)
Use the device in a well-ventilated space. Always
ensure sufficient and safe amount of fresh air.
i)
Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
j)
Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
k)
Use the device on a dry, stable and flat surface.
l)
It is recommended to place the device on rubber
pads to reduce vibrations.
REMEMBER! When using the device, protect
children and other bystanders.
2.3. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The machine may be operated by physically fit
persons who are able to handle the machine, are
properly trained, who have reviewed this operating
manual and have received training in occupational
health and safety.
c)
The machine is not designed to be handled by
persons (including children) with limited mental
and sensory functions or persons lacking relevant
experience and/ or knowledge unless they are
supervised by a person responsible for their safety or
they have received instruction on how to operate the
machine.
d)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
e)
Use personal protective equipment as required
for working with the device, specified in section 1
(Legend). The use of correct and approved personal
protective equipment reduces the risk of injury.
f)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
g)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
h)
Do not use the device near sources of heat and fire.
i)
Ensure proper cooling and avoid accumulation of
heat during prolonged operation of the device.
j)
The operator is responsible for using the device
in accordance with local safety and installation
regulations.
01.03.2019
k)
Never start the pump under pressure.
l)
Do not pull or hang the pump using its power cord
or supply hose.
m)
If the power cord is damaged, immediately
disconnect the plug from electrical outlet.
n)
When pumping is complete, switch off the device
immediately.
o)
DO NOT start the pump before placing the ends of
suction and supply hoses in target tanks.
p)
The device is not designed to pump diesel, petrol,
flammable liquids or to operate in an explosive
atmosphere.
Use
under
those
conditions
forbidden.
q)
DO NOT pump liquids that come into contact with
food or are intended for consumption.
2.4. SAFE DEVICE USE
a)
Do not overload the device. A properly selected
pump will do a better and safer job for which it has
been designed.
b)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
c)
Make sure the plug is disconnected from the socket
before attempting any adjustments, accessory
replacements or before putting the device aside.
Such precautions will reduce the risk of accidentally
activating the device.
d)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
e)
Keep the device in perfect technical condition.
f)
Keep the device out of the reach of children.
g)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
h)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
i)
Do not move, adjust or rotate the device in the
course of work.
j)
Do not leave this appliance unattended while it is in
use.
k)
Clean the device regularly to prevent stubborn grime
from accumulating.
l)
Before each use ensure the nozzle is correctly
installed in the device and that the hose is correctly
attached and undamaged.
m)
Switch off the pump when the system is not in use.
n)
Before each use, make sure that the device is properly
assembled and there are no leaks or damage.
o)
Do not carry or hang the device by the suction or
delivery hose.
p)
If you notice a leak from the pump or hoses,
immediately disconnect the device from the power
source.
q)
Do not use the device with a damaged power cord or
hose.
r)
The device should be protected against external
factors and adverse weather conditions, especially
against rain and moisture.
s)
The device should be placed as close as possible
to the tank so that the suction hose is as short as
possible.
t)
Before each use, check the tightness of suction and
is
9