Opening The Tv Set (Connect 26 Led) - Loewe DVB - T2/C Twin SL1 Série Instructions De Montage

6. Opening the TV set
Connect 26 LED
Pull out the mains plug!
Remove the connecting leads from the TV set.
Detach the short connecting cable between the tuner connections if present.
Undo and remove the screws indicated by the arrows in the relevant figures and according to the TV set model.
(Proceed in the reverse order to replace the rear panel.)
Procedure
Fig. 18
Fig. 19
Fig. 20
Remove the cable cover from the rear of the TV set.
Pull back to detach, and remove from below.
This shows the cable connections with the cable cover deta-
ched.
The foot can be taken off after all screws have been remo-
ved.
The arrows in fig.20 indicate the locations of the screws to
be removed.
Once all the screws have been removed, the rear panel can
be detached.
31