Opening The Tv Set (Individual 32 Selection Sound Led) - Loewe DVB - T2/C Twin SL1 Série Instructions De Montage

3. Opening the TV set
The description uses the TV set Individual 32 Selection Sound LED as
an example.
Pull out the mains plug!
Remove the connecting leads from the TV set.
Detach the short connecting cable between the tuner connections if present.
Undo and remove the screws indicated by the arrows in the relevant figures and according to the TV set model.
(Proceed in the reverse order to replace the rear panel.)
Procedure
Fig. 12
Fig. 13
Remove the cable cover from the rear of the TV set.
Pull back to detach, and remove from below.
The arrows in fig.12 indicate the locations of the screws to
be removed.
The arrows in fig.13 indicate the locations of the screws to
be removed below the cover.
Once all the screws have been removed, the rear panel can
be detached.
28