Loewe DVB - T2/C Twin SL1 Série Instructions De Montage page 26

Fig. 5
Fig. 6
Fig. 7
Fig. 8
Remove the screw indicated by the arrow in fig. 5. The ope-
rating eye and set front are now detachable.
Detach the cable connected to the operating eye (fig. 6).
The operating eye can now be removed.
Remove the set front by lifting upwards and slightly out-
wards.
When later reattaching the set front, be careful not to pinch
the operating eye cable. Route the cable through the ope-
ning on the set front.
Remove the set front and store it in a safe place (to prevent
damage).
The rear panel of the TV set (e.g. as that of the Individual
40 Selection LED 200 DR in the example) is also secured by
screws, indicated by the arrows in fig. 8.
These screws must be removed.
26