Opening The Tv Set (Art 32/40/46 Led, Xelos 32/40 Led) - Loewe DVB - T2/C Twin SL1 Série Instructions De Montage

4. Opening the TV set
Art 32/40/46 LED
Pull out the mains plug!
Remove the connecting leads from the TV set.
Remove the short connecting cable between the tuner connections if available.
Loosen and remove the screws marked by arrows in the appropriate sketch according to the TV set model.
(Proceed in the reverse order to replace the rear panel.)
Procedure
Fig. 14
Fig. 15
a1
If possible, position the TV set so that it is accessible
from all sides.
Unlatch connecting cover (arrow) to the rear and
remove.
Remove the screws indicated by the arrows on the
rear side.
Opening the screws a1 and a2 is applicable only for
TV sets of the 40/46 LED.
We recommend wearing gloves when removing/
mounting the device rear panel/ housing parts.
This lets you avoid finger prints/ impurities on the rear
panel.
Once all the screws have been removed, the
rear panel can be detached.
a2
29