Velleman CTC1000RC Mode D'emploi page 5

 Only use the device for its intended purpose. Using
the device in an unauthorised way will void the
warranty.
4. Features
 4 buttons: arm / disarm / partial arm / panic alarm
 IP rating: IP41
 LED: transmission indicator
 low battery detection
5. Buttons
Refer to the illustrations on page 2 of this manual.
Function
1 away button
2 panic button
3 home button
4 disarm button
5 LED indicator
V. 01 – 12/06/2013
CTC1000RC
Description
Press this button to arm the
system
Press and hold this button for
3 seconds to send a panic
alarm.
Press this button to set the
system in home mode
Press this button to disarm
the system.
If the alarm is sounding,
pressing the disarm button
will turn off the alarm except
if the alarm was triggered
from a panic button or the
remote control itself.
The red LED indicates a
5 ©Velleman nv