GreenWorks Tools G40DT35 Manuel D'utilisation Et De Sécurité page 4

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SV HR HU RO BG EL AR TR HE LT LV ET
English (Original instructions)
i) Stop the tines if the machine has to be tilted for
transportation when crossing surfaces other than grass, and
when transporting the machine to and from the area to be
used.
j) Never operate the machine with defective guards or
shields, or without safety devices, for example deflectors and/
or grass collector, in place.
k) Switch on the motor carefully according to instructions and
with feet well away from the tines.
l) Do not tilt machine when switching on the motor, except
if the machine has to be tilted for starting. In this case, do
not tilt it more than absolutely necessary and lift only the
part which is away from the operator. Always ensure that
both hands are in the operating position before returning the
machine to the ground.
m) Do not transport the machine while it is running.
n) Do not put hands or feet near or under rotating parts. Keep
clear of the discharge opening at all times.
o) Stop the machine, and remove battery pack. Make sure
that all moving parts have come to a complete stop:
1) whenever you leave the machine,
2) before clearing blockages or unclogging chute,
3) before checking, cleaning or working on the machine,
4) after striking a foreign object. Inspect the machine for
damage and make repairs before restarting and operating the
machine; if the machine starts to vibrate abnormally (check
immediately)
5) inspect for damage,
6) replace or repair any damaged parts,
4