Table des Matières
Publicité
Install the Outside Panel
From outside of the shower, install the outside panel. Position the panel with the
rollers facing the outside of the shower/bath.
Carefully lift the door panel up inside of the top track and hang the rollers on the
outside rail.
Roll the panel back and forth along the track to make sure it operates smoothly.
Align the panel with the wall jamb opposite the showerhead side of the
shower/bath.
If the panel does not operate smoothly, adjustment may be needed. If adjustment
is needed, remove the panel.
NOTE: Moving the rollers to the top hole of the hanger brackets will cause the glass
to hang lower. Moving the rollers to the bottom hole of the hanging brackets will
cause the glass to hang higher.
Loosen the roller screw(s) and move the roller to another hole in the hanging
bracket. Insert and tighten the screw(s) and rehang the panel.
Kohler Co.
Outside Panel
Panneau extérieur
Panel exterior
21
1063221-2-A
Publicité
Table des Matières
