Instructions For Installation - Baninni ROOM LERNO BNBTA021 Mode D'emploi

PRODUCT
WARNING: Before installing or using this bedrail you have to read the
instructions with care. If you do not follow the instruction, your child can
risque some danger situations!
WARNING: This bedrail may not be installed onto beds where the
sleepinglevel is situated 60cm or higher from the floor.
WARNING: The bedrail may not be installed on inflatable beds or in babycots.
WARNING: For avoiding all risques there must be a space of 25 cm between
the side of the barrière and the front of the bed, or other parts of the bed.
WARNING: Do not use this bedrail in stead of a babycot, the bedrail does not
give the same level of security.
INSTALLATION

INSTRUCTIONS FOR INSTALLATION:

• Check carefully if all spare parts are present.
• When some spare parts are missing or broken, do not continue to assemble
but contact your salespoint for assistance.
• Take the matress of the bed and place the bedrail on the matress floor. Make
sure there will be a minimum space of 25 cm between the front of the bedrail
and each headend of the bed.
• Fix the the bedrail in such way that there is as less space as possible
between the bedrail and the matress.
• Now fix the bedrail with the screws (H) (See drawing 4)