Baninni ROOM LERNO BNBTA021 Mode D'emploi page 10

• Control if the bedrail is fixed well and put the matress back to its position.
• Attention: the distance between the top of the bedrail and the matress may
not be less than 16cm. If the distance is less than 16 cm you have to adjust the
thickness of your matress.
• Control on regularely basis if the bedrail is still tightened and if the matress
have not been moved away from the bedrail.
• In case any parts get damaged, missing or broken please contact your
salespoint for further assistance.
Place all parts in correct order ready for installation.
Please note points 2 & 3 for reference, note one end of the bar is larger than
the opposite when installing.
Connect the top section of the bedrail together and slide carefully
through the fabric.