Hitachi RB 36DL Mode D'emploi page 16

English
Keep the air intake away from your body as
it may suck your work clothes against the air
intake.
CAUTION
Mount the battery securely to the blower.
If it is not mounted securely, it may fall off
and cause an injury.
If something gets in the air intake, causing
the blower to stop, release the switch
immediately, then remove the battery before
trying to dislodge the foreign object.
Working with the blower
1. Mounting the extension nozzle (Fig. 6)
Align the Protrusion on the extension nozzle
with the groove in the body and press it in
; then twist it until it stops
A
Protrusion
A
Turn
B
Extension nozzle
2. Mounting the battery (Fig. 4)
Press the battery in as shown at right until it
makes a clicking sound as it catches.
3. Turning the blower on (Fig. 3)
• Make sure there is nothing in the area that
might go flying and cause an accident.
• Point the extension nozzle at whatever you
wish to clean and depress the switch.
• Operate with one hand during use. Grasp the
handle with either your left or your right hand,
select the operating mode with the mode
switch and adjust how far in you depress the
switch as you are working.
16
to secure it.
B
Groove
Fig. 6