Hitachi RB 36DL Mode D'emploi page 14

Masquer les pouces Voir aussi pour RB 36DL:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
Pilot lamp
Before insert
After insert
Before
charging
While
The pilot
charging
lamp
lights or
Charging
blinks in
complete
Red.
Charging
impossible
The pilot
Overheat
lamp
standby
lights in
green.
NOTE: When standby for cooling battery, UC36YRSL cools the overheated battery by cooling fan.
Regarding the temperature of the
rechargeable battery.
The temperatures for rechargeable batteries
are as shown in the table below, and batteries
that have become hot should be cooled for a
while before being recharged.
14
Battery
Line
Fig. 5
Lights for 0.5 seconds. Does not light
Blinks
for 0.5 seconds. (off for 0.5 seconds)
Lights continuously
Lights
Lights for 0.5 seconds. Does not light
for 0.5 seconds. (off for 0.5 seconds)
Blinks
Lights for 0.1 seconds. Does not light
Flickers
for 0.1 seconds. (off for 0.1 seconds)
Lights continuously
Lights
3. Charging
When the battery is connected to the battery
charger, charging will commence and the
pilot lamp will light in red. (See Table 2)
NOTE
If the pilot lamp flickers in red, pull out the
plug from the receptacle and check if the
battery is properly mounted.
When the battery is fully charged, the pilot
lamp will blink in red slowly. (At 1-second
intervals) (See Table 2)
Table 2
Rechargeable
batteries
BSL3620
Malfunction in the
battery or the charger
Battery overheated.
Unable to charge
(Charging will commence
when battery cools).
Table 3
Temperatures at which the
battery can be recharged
32°F — 122°F (0°C — 50°C)

Publicité

Table des Matières
loading

Table des Matières