BASIC FUNCTIONS (Cont.)
CONFIRMING THE DISPLAY
Checking the batteries
When the power is turned on, the remaining
battery power will be displayed on the control
panel. If it is low, please replace the batteries.
lights and turns off automatically.
The batteries are OK. You are ready to take pictures.
blinks and other indicators on the control panel are displayed normally.
The battery power is low and the batteries should be replaced. You can shoot with the
remaining power, but the batteries may die soon.
blinks and then turns off after 12 seconds. Other indicators on the control
also go out.
The batteries are dead and should be replaced immediately.
Checking the number of storable pictures left
When the power is turned on in the still picture mode, the number of storable pictures
left will appear on the control panel. For movie pictures, the seconds remaining will
appear.
The number of storable pictures
left will appear.
When there is no storable space left for
pictures in the still picture record mode :
Beeps will emit when the card cannot store
anymore pictures and the displays below will
appear on the control panel and viewfinder. If this
happens, replace the card with a new/storable card
or erase unwanted images in the existing card to
make space.
14
The seconds remaining will appear.
Number of storable
pictures left
Control panel
Control panel
Viewfinder
CARD FULL
Battery
check
Remaining
time