List Of Materials; Parts Not Supplied - Elica EAL330S1 Guide D'utilisation, D'entretien Et D'installation

LIST OF MATERIALS

Removing the packaging.
I CAUTION
Remove carton carefully, Wear gloves to protect against sharp edges.
I WARNING
Remove the protective film covering the product before putting into operation.
Supplied Part
Hood assembly and
LED lamps already installed
Rectangular duct 3 ⁄ " x 10" (8.3 x 25.4 cm)
1
4
with back draft dampers
Tools/Materials required
• Drill
• 1 ⁄ " (3.0 cm) drill bit
1
4
• ⁄ " (3.0 mm) drill bit for pilot holes
1
8
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Caulking gun and weatherproof caulking compound
• Saber or keyhole saw
• Metal snips
• Screwdrivers:
- Phillips
- Flat-blade
Pieces
1
1
Parts no supplied
Optional accessories and consumable parts
KIT
Recirculating Kit
7" Round
No-Return
Valve Kit
Upgrade
Filters Kit
Supplied Part
4.5x13 mm
3.5x6.5 mm
# Part
30" (76.2 cm)
KIT02178
KIT02723
KIT02591
Pieces
4
3
36" (91.4 cm)
KIT02179
KIT02592
5