Medion LIFE P85018 Mode D'emploi page 130

DHCP Server
Here you can switch the DHCP server for the WLAN
HDD Adapter on or off.
Enable the DHCP server to operate the WLAN
•
HDD Adapter as an access point that allocates ac-
tive IP addresses to clients that connect with the
DHCP server.
Disable the DHCP server to manually allocate
•
the IP addresses to the clients. The IP address must
be within the address range that you can define for
the active DHCP server (see next section)
DHCP server activated:
 In the event of an active DHCP server, you can view
the devices currently connected to the WLAN HDD
Adapter via the option Client List .
 You can set the IP address range under Start Ad-
dress and End Address within which the
DHCP server allocates IP addresses to clients.
 Enter the IP address under which the access point
for the WLAN HDD Adapter is to be accessible un-
der Gateway.
NOTE!
The IP address for the gateway must be outside
of the IP address range for the DHCP server.
DE
EN
FR
G
N
U
129 of 166