Docking connection for MEDION
Drive'nGo hard disks
You can connect a MEDION Drive'nGo hard drive here.
USB connection on the right side of the
device
The USB connection on the side of the device can be
used to connect hard drives from other manufacturers
or USB sticks.
Micro USB connection
The Micro USB connection is used for charging the in-
ternal battery. When the device is switched off, you can
use this connection to access the card reader from a PC.
SD card reader
You can connect an SD/SDHC card here.
The data on the SD/SDHC card can be accessed via the
network and is also accessible via a direct connection
to a computer when the device is switched off.
7.3. Switching on the device
Press the ON/OFF switch for 3 seconds to turn on
the WLAN HDD Adapter.
The ON/OFF LED will flash orange/blue while the
•
system starts up.
Afterwards, the ON/OFF LED will be permanent-
•
ly lit in blue. The WLAN HDD Adapter is now ready
for use.
114 of 166